ISS Utilization: NanoRacks Bishop Airlock Module
The deployment of CubeSats and other small satellite payloads from the orbiting laboratory by commercial customers and NASA has increased in recent years. To support demand, NASA has accepted a proposal from NanoRacks to develop the first commercially funded airlock on the space station. 1)
- “We want to utilize the space station to expose the commercial sector to new and novel uses of space, ultimately creating a new economy in low-Earth orbit for scientific research, technology development and human and cargo transportation,” said Sam Scimemi, director, ISS Division at NASA Headquarters in Washington. “We hope this new airlock will allow a diverse community to experiment and develop opportunities in space for the commercial sector.”
- In addition to the large number of CubeSats and small satellites NanoRacks wants to deploy from station, their proposed airlock will also be capable of supporting multiple external payloads.
- Signaling a significant step forward in their airlock plans, NanoRacks announced an independent partnership with Boeing on Feb. 6, 2017, to develop the airlock. Once NanoRacks successfully completes the phases outlined in a Space Act Agreement NanoRacks signed with NASA in 2016, the agency has committed to install the airlock for commercial use, research, and technology demonstrations from the International Space Station. 2) 3) 4)
- In May 2016, NanoRacks and NASA signed a Space Act Agreement in order to install a private airlock module onboard the ISS – the first in station history. The NanoRacks Airlock Module will be both a permanent commercial uncrewed module onboard the International Space Station, and also a module capable of being removed from the space station and used on a future commercial platform.
- NanoRacks has selected Boeing to fabricate and install the Airlock’s PCBM (Passive Common Berthing Mechanism), which is used to connect most pressurized modules of the ISS – and is the most critical piece of hardware for the airlock. The PCBM hardware is being manufactured at the Boeing facilities in Huntsville, Alabama. Boeing will also provide additional engineering services required for developing and manufacturing of the airlock.
- The commercial opportunities through Airlock begin with CubeSat and small satellite deployment from station and include a full range of additional services to meet customer needs from NASA and the growing commercial sector. Currently, CubeSats and small satellites are deployed through the government-operated Japanese JEM/Kibo Airlock. Additionally, the crew on board may now assemble payloads typically flown in soft-stowage ISS Cargo Transfer Bags into larger items that currently cannot be handled by the existing JEM/Kibo Airlock.
- The in-house team at NanoRacks, led by Mr. Brock Howe, will oversee the project management, mechanical and avionics design engineering, safety, operations, quality assurance, mockups and crew training, and the final assembly, integration and testing of the Airlock. Additionally, NanoRacks will be manifesting the Airlock for launch, with an estimated launch in 2020.
Figure 1: Artists concept of the first commercially funded airlock on the space station being developed by NanoRacks that will launch on a commercial resupply mission in 2020. It will be installed on the station’s Tranquility module, Node 3 Port (image credit: NanoRacks)
Airlock Overview (Ref. 4):
The Airlock is manifested to launch on a Dragon-Falcon 9 flight in 2019. After berthing to ISS, the Airlock will be removed from the Dragon Trunk using the Space Station Remote Manipulator System (SSRMS) and maneuvered and berthed to ISS Node 3, Port Common Berthing Mechanism (CBM) berthing location. Figure 1 shows the installed Airlock onto Node 3, Port.
The Airlock consists of the following systems:
- CDHS (Command and Data Handling System)
- EPS (Electrical Power System)
- Structural System
- TCS (Thermal Control System)
- Video System
- Airlock Utilities
- ISS Wireless System
- Payload Support System
The total mass of Airlock is approximately 1,060 kg.
The Airlock structure is a fairly simple structure based on bell jar type pressure shell design. No hatch is included within the Airlock and thus the Node 3 hatch will provide the isolation of the Airlock from the rest of the ISS. A PCBM (Passive Common Berthing Mechanism) will provide the structural interface to the ISS Node 3. Two PVGFs (Power and Video Grapple Fixtures) will provide the interface to the ISS robotics. The Airlock structure also consists of the inner pressure shell with an outer skin that provide MMOD (MicroMeteoroid Orbital Debris) protection.
NanoRacks selected Boeing to fabricate and install the Airlock’s PCBM (Passive Common Berthing Mechanism). PCBM’s are used to connect most pressurized modules of the ISS, and in the case of the Airlock, the PCBM is the most critical piece of hardware. The PCBM hardware is being manufactured at the Boeing facilities in Huntsville, Alabama. Boeing will also provide additional engineering services required for the developing and manufacturing of the Airlock.
The NanoRacks Airlock Module came to exist as a result of customer demand, a growing market, and, specifically, the need for satellite deployments to operate at a rate demanded by the commercial market. In four years’ time, NanoRacks has deployed nearly 200 CubeSats from the ISS, from universities, companies and governments, with over 50 in the immediate pipeline. Additionally, NanoRacks is preparing to deploy larger satellites, known as “microsatellites,” which are comparable to the size of microwaves. NanoRacks refers to this satellite deployer as the “Kaber” deployer. The first two Kaber satellites were deployed in Fall 2017 (see ISS-Kaber on the eoPortal). - This class of satellites is the fastest growing segment of the market.
• October 24, 2017: Early this morning, NanoRacks successfully deployed the Kestrel Eye IIM (KE2M) microsatellite via the Company's Kaber Microsatellite Deployer (Kaber) from the International Space Station. This is the largest satellite that NanoRacks has deployed to date, and the first deployed from the Kaber deployer. 5)
• On October 27, 2017, NanoRacks successfully deployed NovaWurks’ SIMPL satellite via the Company’s Kaber Microsatellite Deployer (KABER) from the ISS (International Space Station) early this morning. This is the second Kaber-class deployment that NanoRacks completed this week. 6)
Figure 2: SpaceWorks Enterprises Launch History (image credit: Space Works)
NanoRacks continues to prove the International Space Station as an ideal satellite deployment platform for a number of customer needs – including the availability of numerous launch opportunities, ideal deployment inclination for Earth observation, and hands-on operations via the NanoRacks BRIDGE (Base for Research, Investigation, and Deployment ofMicrogravity Experiments) and the astronaut crew on board, including unique photo opportunities of deployments. Additionally, NanoRacks has developed the “Stash and Deploy” concept, in which satellites are stored on the International Space Station for extended periods of time, and deployed on demand when time is critical, rather than waiting for a launch opportunity.
Commercial opportunities through Airlock begin with CubeSat and small satellite deployment from the ISS, and include a full range of additional services to meet customer needs from NASA and the growing commercial sector. Currently, NanoRacks’ customers CubeSats and small satellites are deployed via the NRCSD (NanoRacks CubeSat Deployer) through the Japanese Kibo Airlock. The NanoRacks Airlock Module will offer about five times the payload volume currently accessible via Kibo.
The market demand can be broken down as follows:
1) Government organizations (both U.S. and foreign)
2) Satellites companies
3) Commercial ISS users
4) Educational users.
Role of U.S. Government and Future Implications:
NanoRacks has chosen a business model that is quite normal on the Earth, but far less common in the nation’s space program. Fundamentally, NanoRacks pays for its own hardware. For example, NanoRacks has invested $5 million in the Company’s External Platform, over $4 million in the satellite deployment program, close to $1 million in internal research frames., and $15 million to manufacture the Airlock. This expenditure has made the International Space Station more robust, asserted American leadership, and spurred the growth of new markets.
NanoRacks does not seek upfront NASA money because that’s not how the commercial marketplace operates. NanoRacks is focused on the seamless transition from ISS to a marketing place in LEO (Low Earth Orbit) with multiple commercial space stations. The agility of the private sector is needed to create this transition, and eliminate any gaps in LEO presence.
NanoRacks investments, especially in the Airlock, are intended to develop the technical expertise and hardware base to eventually own and operate the Company’s own space stations – a realistic goal the Company has set as United States policy and PPPs (Public Private Partnerships) with NASA have matured.
The Airlock is a pioneer program in the commercial space market. Together with NASA, NanoRacks is forging an even larger partnership than just that for satellite deployment – one where the commercial sector provides hardware, destinations, and resources, and the government acts as a customer. NanoRacks has made it clear to the Space Station Program Office that the Company expects others to enter into partnerships as such with NASA – both for space station use, and for better use of taxpayer resources to further NASA’s mission to bring humans into deep space.
In summary, the NanoRacks Airlock Module, launching in 2019, will dramatically increase commercial activity on the International Space Station, including five times the payload volume for satellite deployment. Boeing is manufacturing the PCBM (Passive Common Berthing Mechanism), the most critical piece of the Airlock. The Airlock will be owned and operated by NanoRacks for the remaining lifetime of the ISS, with Boeing as a partner for the duration, and is capable of being relocated to a future commercial LEO space station.
• November 16, 2020: Anyone who has gotten a sofa stuck in a doorway on moving day knows how frustrating it is when there’s no other way in or out. The doorways on the International Space Station, or airlocks, have worked just fine for 20 years. But as more researchers and companies wish to expand the scope and size of the projects they send into low-Earth orbit, a larger doorway could help. 7)
- Opening another portal to receive more shipments and deploy more satellites and experiments is the challenge a private company took up – Nanoracks LLC, headquartered in Webster, Texas. With support from NASA, the company built a new and different kind of doorway into space.
- The Nanoracks Bishop Airlock Module will serve as another door to space, helping to move larger payloads inside and outside the station. This will alleviate one bottleneck slowing down the deployment of new small satellites and CubeSats from the space station. Bishop will also significantly increase the amount of research that can be done in low-Earth orbit – research that helps us better understand the space environment but also has implications for Earth imaging, medical research, and biomanufacturing.
Figure 3: The Nanoracks LLC Bishop Airlock Module that is being added to the space station has five times the capacity of the existing Japanese airlock, officially known as the JEMAL (Japanese Experiment Module Airlock) shown here with astronaut Kate Rubins (image credit: NASA)
- The new airlock arrives aboard the SpaceX Dragon on the company’s 21st commercial resupply services mission for NASA (CRS-21). It’s the first commercial airlock added to the space station and will be attached to the port on U.S. Node 3, also called Tranquility.
- The arrangement is part of NASA’s strategy to provide more opportunities for U.S. industry with a goal to achieve a sustainable economy in low-Earth orbit from which NASA can be one of many customers. That allows NASA to focus government resources on deep space exploration through the Artemis program and landing the first woman and next man on the surface of the Moon.
- In this case, under a Space Act Agreement, Nanoracks provided the initial investment and the physical structure. NASA will provide power and space-to-ground communication, as well as astronauts to handle cargo and run experiments. Once operational, the new door will mean more access for NASA and everyone else – private companies, academic institutions, public agencies, even citizens.
A Public-Private Partnership (PPP)
- After successfully passing systems test and installation, Bishop will provide five times the capacity of the station’s only other operational airlock being used to send things outside the space station, which is provided by the Japan Aerospace Exploration Agency, or JAXA, as part of its participation in and support of the International Space Station.
Figure 4: The Nanoracks Bishop Airlock can be attached to Module 3 and opened to space to release satellites and run experiments. It can also be detached and moved to different locations. Taking advantage of the opportunity to expose experiments to different elements such as sunlight or atomic oxygen, this flexibility enables a wide range of research possibilities (image credit: Nanoracks)
- “That’s more volume than can be either brought inside or taken outside right now,” said Mike Read, manager of the space station business and economic development office at NASA’s Johnson Space Center in Houston. In his role supporting NASA’s public-private relationships on the station, Read affirmed the agency’s allocation of the port to the new airlock will serve public and private customers alike.
- The bell jar-shaped airlock also contains multiple rows of standardized tracks for mounting automated modules and other components for housing experiments, as well as electrical and data connections to run and monitor them. There are also six external mounting locations and a WiFi antenna to transmit data.
- Bishop is designed to support a variety of configurations that will support any combination of satellites and experiments. Each time it’s opened to space, the airlock can deploy multiple satellites, while passive experiments can run simultaneously. The robotic arm can be used to extract and launch satellites or mount external experiments. It can also move the airlock to a new position. Different sides of the station, for example, experience different exposure to elements like sunlight or atomic oxygen, enabling a wide range of research possibilities. This flexibility makes it possible to alternate between Earth-observation and astronomical study.
- NASA became an early adopter by pre-purchasing multiple uses of the airlock and is starting with a mundane but recurring need – garbage. Currently, after resupply spacecraft are unloaded, astronauts pack them full of as much trash as possible. The craft and its contents are then allowed to fall into Earth’s atmosphere, where most of it burns up. But the new door could provide an additional alternative to remove large items. “We're going to do some technology demonstrations with trash disposal” to see how it works, Read explained.
- A spacewalk problem could also be solved by outfitting the airlock with a high-tech toolbox. Right now, astronauts need to carry with them all the tools they might need during any extravehicular activity (EVA) as they exit the station. If a different tool is required, they must go back inside – an arduous and time-consuming process. Instead, astronauts could pre-load additional instruments into a toolbox that’s mounted externally for the duration of the EVA on the Bishop Airlock, making spacewalks more efficient.
- NASA isn’t the only entity that will benefit from the new airlock. The CubeSat industry is rapidly expanding, from the number of units being deployed to what the little satellites can do. Currently, that expansion is limited by the availability of the single JAXA airlock used for deployments. It quickly became clear that as more companies joined the space economy, “there was going to be congestion” that would lead to launch delays, said Mike Lewis, chief innovation officer with Nanoracks.
- With the new door, Nanoracks aims to keep the pipeline flowing, even as volume ramps up.
- One major application for the CubeSats that have been launched from the space station over the past decade is Earth imaging. This is already used to help farmers monitor fields for better crop management, improve weather forecasts, and more. The new airlock will facilitate additional deployments that could enable higher-resolution images and expanded opportunities for Earth observation.
- The airlock will also increase space for experimental testing in microgravity, which offers advantages for work such as growing living tissues, a long-term goal of the scientific community. This is what's known as biomanufacturing. Previous medical research in microgravity has resulted in improved osteoporosis treatment to help both astronauts and people on Earth mitigate bone loss.
Figure 5: A brand new airlock on the International Space Station will soon provide an easier way for companies and institutions to access space (video credit: NASA Spinoff)
- Nanoracks already has an agreement with NASA and ESA (European Space Agency), which will use the Bishop Airlock to move cargo. Private customers include Gitai, a robotics company that will use the airlock to test robot systems designed to perform work inside and outside the space station.
- Customers expressing interest in using the airlock include commercial space companies, consumer goods manufacturers, and educational organizations. Some have products, services, or research that have already benefited from access to the National Lab and the scientific equipment the company already has onboard – three NanoLab research platforms, a microscope, a centrifuge, and two plate readers, in addition to an exterior-mounted testing platform.
- The increased capacity of the airlock will accommodate more research and other projects on station. Nanoracks’ existing customer base includes Adidas, Aerospace Corporation, Felix and Paul Studios, Millennium Space Systems, MIT Media Lab, the Student Spaceflight Experiments Program, and international space agencies.
- “We’re embarking on more and more public-private partnerships with NASA, building up the ecosystem in low-Earth orbit,” said Nanoracks CEO Jeffrey Manber. “Not only is that important for research opportunities, but it also paves the way for innovations.”
- NASA has a long history of transferring technology to the private sector. The agency’s Spinoff publication profiles NASA technologies that have transformed into commercial products and services, demonstrating the broader benefits of America’s investment in its space program. Spinoff is a publication of the Technology Transfer program in NASA’s Space Technology Mission Directorate.
• October 20, 2020: NanoRacks is pleased to announce that both NASA and the European Space Agency (ESA) have pre-purchased Bishop Airlock Cycles for agency and third-party use. The NanoRacks Bishop Airlock, launching this Fall to the International Space Station (ISS), is the first-ever commercially built, owned, and operated airlock on the ISS and provides five times the existing payload volume currently available on station. 8)
- ESA has pre-purchased five airlock cycles, and NASA six, with an option for four additional cycles at a discounted rate.
- “The signature of this contract is a concrete sign of the European stake in the expanding low-Earth orbit economy,” says Sylvie Espinasse, Head of the European Space Agency’s Washington DC office. “Following ESA member States’ investment in International Space Station research and development, European industry is now stepping in and forging innovative ties with US companies, which bodes very well for the future!” — But the future potential is limitless.
- “Everything that commercial players are doing to show new people that they can actually use microgravity to their benefit is incredibly important,” said Read, adding that the business these companies do will eventually alleviate taxpayers of some of the cost of maintaining the station.
Figure 6: The NanoRacks Team prepares the Bishop Airlock for final inspections at NASA’s Kennedy Space Center’s Space Station Processing Facility (SSPF) in October, 2020 (image credit: NanoRacks)
- “We’re thrilled to see both NASA and ESA leveraging commercially available opportunities on the Space Station,” says NanoRacks CEO Jeffrey Manber. “This is how public-private partnerships are supposed to work. Through our Space Act Agreement with NASA, we have been provided access to Node 3 where the Bishop Airlock will live. We then privately funded the Bishop Airlock, using no taxpayer funds for the hardware, and are in turn providing a service at a competitive rate to both the US and European governments, allowing the ISS to function at optimal levels of productivity.”
- Some Bishop use-cases include CubeSat and MicroSatellite deployment, hosted payloads, microgravity and robotics experiments, Extra-Vehicular Activity (EVA) support, and more.
- NanoRacks is continuing to expand use-case opportunities to the US government and is in discussions with NASA on multiple utilization efforts. The Bishop Airlock is allowing NASA to follow the agency goal of serving as one of many customers for commercial services in space, allowing the low-Earth orbit market to expand from beyond just government-provided products and services.
- “We designed Bishop with the future in mind. We knew at the beginning that the first ideas of how to leverage this platform were just that – the first,” says Brock Howe, Bishop Airlock program manager. “But as Bishop has come to life, the ways researchers and engineers are looking at this platform are evolving and we’re excited to build out custom missions for our customers, beyond the scope in which we first imagined Bishop would be used.”
• September 9, 2020: In 2021, space robotics start-up GITAI of Tokyo, Japan, in collaboration with NanoRacks, will conduct a technical demonstration of a GITAI robot executing versatile tasks inside the NanoRacks’ Bishop airlock module installed on Node 3 of the International Space Station (ISS). In this technical demonstration, GITAI’s space robot “S1” will be installed inside Bishop’s pressurized volume to conduct two experiments: IVA (Intra-Vehicular Activity) tasks such as switch and cable operations, and assembly of structures and panels to demonstrate its capability for ISA (In-Space Assembly). All operations conducted by the S1 GITAI robotic arm will be autonomous, followed by some teleoperations from NanoRacks’ in-house mission control. GITAI is managing the technical development of the S1 space robotic arm. NanoRacks is providing the launch opportunity, managing on-orbit operations, and data downlink. NanoRacks is providing this launch opportunity to the ISS via their Space Act Agreement with NASA. 9)
Figure 7: Illustration of the GITAI robot inside the NanoRacks Bishop Airlock (image credit: NanoRacks)
Figure 8: Ground experiment video of the GITAI robot technical demonstration for versatile tasks inside the NanoRacks Bishop Airlock (recorded in the ISS mock-up facility at the GITAI Tokyo office)
- Through this technical demonstration, GITAI will acquire the technology, know-how, and experience necessary to develop a robot that can conduct versatile tasks in space. This demonstration will be applied to future development of autonomous robots working in the harsh space environment that can conduct docking, repairs, and maintenance tasks for On-Orbit Servicing (OOS) and conduct various tasks for lunar exploration and lunar base construction.
- “We are very excited to be the world’s first private company to conduct a technical demonstration of a space robot, in collaboration with the world’s leading provider of commercial space services, NanoRacks,” says GITAI’s Founder & CEO, Mr. Sho Nakanose. “In the current space market, there are many players trying to solve the space transportation problem, but very few standing up to the challenge to provide an alternative option for getting work done in space. However, in today’s booming space industry, there is a growing demand for versatile tasks to be conducted in space, but in a more reasonable and non-life-threatening manner. With the success of this technical demonstration, GITAI will be able to provide a significantly cheaper and safer means of conducting various tasks in space, which will bring about a true dawn of the space commercialization age.”
- “We are thrilled to be working with GITAI for the first commercial project scheduled in the Bishop Airlock,” says NanoRacks CEO Jeffrey Manber. “We designed Bishop with the goal of providing increased commercial access to the International Space Station (ISS) and building a platform that allows for complex and customizable projects that were not able to be completed on the ISS before. The Bishop Airlock is a place for creativity, and we cannot wait to see GITAI’s robotics come to life and enable incredible new technology.”
• August 5, 2019: In-space transportation startup Momentus announced an agreement with NanoRacks to send Momentus’ Vigoride small satellite shuttle customers into space through NanoRack’s Bishop Airlock Module. 10)
- “We are looking forward to a long and fruitful partnership with NanoRacks,” Momentus CEO Mikhail Kokorich, said in a statement. “The Momentus service offerings are complementary to that of NanoRacks, allowing their customers to go beyond the station to a higher altitude, prolonging their mission life.”
- NanoRacks, a company founded in 2009 to spur commercial utilization of space, launches cubesats and microsatellites for customers from the International Space Station as well as from Northrop Grumman’s Cygnus spacecraft. To offer space access for larger satellites seeking to fly off the space station, NanoRacks is developing the Bishop Airlock Module, which it plans to send to ISS in 2020.
- Once the Bishop Airlock is in place, Momentus will send its Vigoride customers into orbit through the commercial airlock, Momentus and NanoRacks announced Aug. 5 at the Small Satellite Conference here.
- “This is exactly why NanoRacks chose to invest in the first-ever commercial airlock for the space station,” NanoRacks CEO Jeffrey Manber, said in a statement. “Bishop is here to enable technology development and to further enhance our customers’ abilities in space. Momentus is doing both.”
- Momentus plans to conduct a test launch in 2020 of Vigoride, a shuttle to ferry payloads from one location in low Earth orbit to another, by sending a satellite into orbit through NanoRacks’ Kaber Microsat Deployer on the space station. Kaber sends satellites weighing about 82 kilograms or less out of the Japanese Experimental Module airlock.
- Momentus plans to conduct a test launch in 2020 of Vigoride, a shuttle to ferry payloads from one location in low Earth orbit to another, by sending a satellite into orbit through NanoRacks’ Kaber Microsat Deployer on the space station. Kaber sends satellites weighing about 82 kilograms or less out of the Japanese Experimental Module airlock.
- NanoRacks and its partners are designing the Bishop airlock to work both on the International Space Station and on future commercial space stations. Bishop will have five times the volume of the Japanese airlock in addition to platforms for hosted payloads and pressurized research racks, according to the Aug. 5 news release.
- NanoRacks plans to send the Bishop airlock to the space station in 2020 on SpaceX CRS-21 (Commercial Resupply Service-21) mission.
- The NanoRacks airlock module - dubbed "Bishop" - is the first-ever commercial airlock that will operate on the International Space Station. Owned and operated by NanoRacks, Bishop will be a permanent commercial module on the ISS. It can also be removed from the ISS for use on future commercial platforms under the NanoRacks Space Outpost Program. Bishop will offer five times more satellite deployment volume than opportunities available on the ISS today. It is scheduled to launch on the SpaceX CRS-21 service mission in January 2020.
- Thales Alenia Space produced and tested the critical pressure shell for Bishop, as well as various secondary structures, including the Micrometeoroid and Orbital Debris (MMOD) shields with multilayer insulation (MLI) panels, the power and video grapple fixture support structure and other structural components.
- NanoRacks is responsible for project management, mechanical and avionics design engineering, safety, operations, quality assurance, mockups and crew training, as well as the final assembly, integration and testing of the Bishop airlock.
Figure 9: The "Bishop" Airlock Shell ready to ship to NanoRacks (image credit: TAS)
Figure 10: The NanoRacks Bishop Airlock Module is the first-ever commercial Airlock that will operate on the International Space Station. Owned by NanoRacks, Bishop will be both a permanent commercial un-crewed module onboard the International Space Station, and also a module capable of being removed from the Space Station and used on a future commercial platform, such as Independence-1. Bishop will offer five times the satellite deployment volume than current opportunities available on the Space Station today. The Airlock is manifested to launch in late 2019 (video credit: NanoRacks, Published on Sep 13, 2018)
• April 17, 2018: The NanoRacks Space Station Airlock Module “Bishop” met another major milestone with completion of the CDR (Critical Design Review) on March 20 and 21, 2018 in Houston, Texas. This milestone begins the transition from the engineering design phase to the fabrication phase. Detailed design drawings such as those for the critical pressure shell will be signed and released to NanoRacks fabrication partner, Thales Alenia Space, in order for them to continue their fabrication efforts. 12)
Figure 11: Illustration of the NanoRacks Airlock - first commercial Airlock on the Space Station (image credit: NanoRacks)
Figure 12: Airlock technical overview (image credit: NanoRacks) 15)
• NanoRacks reports in February 2018, that Thales Alenia Space has been chosen as the latest partner in its commercial airlock program. Thales Alenia Space will produce and test the critical pressure shell for NanoRacks' Airlock Module, which is targeting to be launched to the International Space Station late 2019, and will be used to deploy commercial and government payloads. Thales Alenia Space will also manufacture various secondary structures, including the MMOD (Micrometeoroid Orbital Debris) shields with MLI (Multi-Layer Isolation) panels, the power and video grapple fixture support structure and other structural components. 16)
- "We are very proud of our selection by NanoRacks for this key commercial program," said Walter Cugno, Vice President, Exploration and Science at Thales Alenia Space. "Signing this contract not only ensures our continued role as a global leader in space infrastructures, it also emphasizes our distinctive skills and expertise. Thales Alenia Space will bring to this program over 40 years of experience in the design and production of high-technology solutions and will continue to provide these capabilities both for the International Space Station and for future space exploration initiatives."
- NanoRacks signed a Space Act Agreement with NASA in 2016 to install the first-ever private Airlock Module on the International Space Station. In February 2017, NanoRacks announced a partnership with Boeing to build and install the PCBM (Passive Common Berthing Mechanism), which will connect the Airlock to the rest of the Space Station.
- "Thales Alenia Space was the obvious choice when it came to fabricating our Airlock's pressure shell," said Brock Howe, NanoRacks' Head of Airlock. "Thales Alenia has manufactured over half of the Space Station's pressurized volume, they understand the Space Station's systems and they have produced some of the world's best aerospace hardware. We're looking forward to a very successful partnership that expands our manufacturing alliances into the heart of Europe."
- Thales Alenia Space will produce and test the pressure shell this year, then ship it to NanoRacks' Integration Facility in Houston, Texas in 2019. NanoRacks will integrate the avionics and wiring to complete the airlock assembly.
- NanoRacks' engineering and operations teams will handle airlock integration, functional testing, crew training and final inspections. The Airlock will be then shipped to Florida for final pre-launch preparations and installation on the SpaceX Dragon Trunk, to get ready for the scheduled launch on the SpaceX CRS-19 mission. NanoRacks also teams up with ATA Engineering and Oceaneering on the airlock's subsystems.
• October 3, 2017: NanoRacks announced Oct. 3 that it had raised an undisclosed amount to support development of a commercial airlock module for the International Space Station. 17)
- NanoRacks said that Space Angels led the bridge round investment in the Houston-based company. Formerly known as Space Angels Network, Space Angels provides early-stage funding to companies through its members, individual accredited investors.
- The undisclosed funds will be used for completing a commercial airlock module that NanoRacks plans to install on the ISS in 2019. “This investment will expedite our production, and it’s wonderful to have Space Angels invested in this landmark program to enable the future of commercial space,” Jeff Manber, chief executive of NanoRacks, said in a statement.
- NanoRacks signed an unfunded Space Act Agreement with NASA in 2016 to develop the airlock, which will handle satellite deployments and other experiments that today use the airlock in the Kibo module. “The reason we want our own airlock is this airlock is going to be five times bigger than the current airlock, and it’s going to be far more commercial,” Manber said in a Sept. 27 presentation at the International Astronautical Congress in Adelaide, Australia. - In addition to satellite deployments and experiments, he said the module will be commercial “real estate” on the station, with the ability to mount payloads on its exterior. “It’s getting us more into the real estate business and space station operations,” he said.
Launch: A launch of the NanoRacks Airlock Module Bishop on the SpaceX Dragon 2 Trunk is planned for the SpaceX CRS-21 Dragon mission in December 2020. The launch vehicle is the Falcon-9 v1.2 (Block5) and the launch site is the Cape Canaveral SLC-40 (Space Launch Complex-40). The mission is contracted by NASA and will be flown by SpaceX using a Cargo Dragon. This will be the first flight for SpaceX under NASA's CRS Phase 2 contract awarded in January 2016.
The Bishop Airlock is the first permanent, commercial addition to the International Space Station infrastructure. The Bishop Airlock offers 5 x the current volume that can be moved in and out of the Space Station today. Built and operated by NanoRacks, Bishop will enable commercial utilization of the International Space Station to its fullest extent. 18)
Table 1: SpaceX to begin flights under new cargo resupply contract next year 19)
Orbit: Near-circular orbit of the ISS, altitude of ~400 km, inclination = 51.6º, period = 93 minutes.
1) Mark Garcia, ”Progress Underway for First Commercial Airlock on Space Station,” NASA, Feb. 6, 2017, URL: https://www.nasa.gov/feature/progress-underway-for-first-commercial-airlock-on-space-station
2) ”New airlock is a big step towards transition to more commercial ISS,” NanoRacks, Feb. 6, 2017, URL: http://nanoracks.com/nanoracks-boeing-first-commercial-airlock-module-on-iss/
”NanoRacks, Boeing to Build First Commercial Airlock Module on
International Space Station,” NanoRacks Press Release, Feb. 6,
2017, URL: http://nanoracks.com/wp-content/uploads/
4) Jeffrey Manber, Kevin D. Foley, ”The First Commercial Airlock Module: Building The Commercial Space Market,” Proceedings of the 68th IAC (International Astronautical Congress), Adelaide, Australia, 25-29 Sept. 2017, paper: IAC-17-F1.2.3
5) ”NanoRacks Successfully Deploys First Customer Microsatellite from ISS, Largest to Date,” NanoRacks, 24 Oct. 2017, URL: http://nanoracks.com/largest-customer-microsatellite-deployed/
6) ”NanoRacks Deploys Second Kaber-Class Microsatellite This Week, First On-Orbit Assembly,” NanoRacks, 27 Oct. 2017, URL: http://nanoracks.com/second-kaber-microsatellite-deployed/
7) Margo Pierce, ”A New Doorway to Space,” NASA Spacetech, 16 November 2020, URL: https://www.nasa.gov/directorates/spacetech/spinoff/New_Doorway_to_Space
8) ”Bishop Airlock Cycles Pre-Purchased by NASA and European Space Agency,” NanoRacks Press Release, 20 October 2020, URL: https://nanoracks.com/bishop-airlock-nasa-esa-purchase/
”GITAI & Nanoracks announce technical demonstration of a
GITAI robot inside the Nanoracks Bishop Airlock,” NanoRacks Press
Release, 9 September 2020, URL: https://nanoracks.com
11) ”Thales Alenia Space reaches key milestone for NanoRacks' airlock module,” Thales Group, 20 March 2019, URL: https://www.thalesgroup.com/en/worldwide/space/press-release
14) ”Bishop: The NanoRacks Airlock Module -Your Commercial Gateway to Space,” NanoRacks, URL: http://nanoracks.com/wp-content/uploads/NanoRacks-Airlock-Presentation.pdf
15) Brock Howe, ”NanoRacks Airlock Module - The Commercial Gateway to Space,” NanoRacks, URL: http://nanoracks.com/wp-content/uploads/NanoRacks-Airlock-Presentation.pdf
”NanoRacks adds Thales Alenia Space to team up on Commercial
Space Station Airlock Module,” Space Daily, 5 Feb. 2018, URL: http://www.spacedaily.com/reports/NanoRacks_adds_
17) Jeff Foust, ”NanoRacks raises funding for commercial airlock module,” Space News, 3 Oct. 2017, URL: http://spacenews.com/nanoracks-raises-funding-for-commercial-airlock-module/
19) Stephen Clark, ”SpaceX to begin flights under new cargo resupply contract next year,” Spaceflight Now, 2 August 2019, URL: https://spaceflightnow.com/2019/08/02/
The information compiled and edited in this article was provided by Herbert J. Kramer from his documentation of: ”Observation of the Earth and Its Environment: Survey of Missions and Sensors” (Springer Verlag) as well as many other sources after the publication of the 4th edition in 2002. - Comments and corrections to this article are always welcome for further updates (email@example.com).