Minimize Landsat-9

Landsat-9

Spacecraft   Launch    Sensor Complement   Ground Segment   References

Landsat-9 — a partnership between NASA and USGS (U.S. Geological Survey) — will continue the Landsat program's critical role in monitoring, understanding and managing the land resources needed to sustain human life. Today's increased rates of global land cover and land use change have profound consequences for weather and climate change, ecosystem function and services, carbon cycling and sequestration, resource management, the national and global economy, human health, and society. 1) 2) 3)

Landsat is the only U.S. satellite system designed and operated to repeatedly observe the global land surface at a moderate scale that shows both natural and human-induced change.

Landsat9_AutoB

Figure 1: Building on the Landsat Legacy (image credit: NASA)

• In 2016, the Landsat-9 project has been fast-tracked for a December 2020 launch (initially planned for 2023) .The risk reduction of a Landsat data gap is a high priority of the U.S. Sustainable Land Imaging Program. Landsat-9 will be a rebuild of Landsat-8 so it can be launched as soon as possible. 4)

- Hence, NASA HQ amended direction in response to FY16 appropriations and associated congressional language targeting a 2020 launch (Ref. 2).

- In January 2016, the project has been directed to pursue the earliest possible launch date within the spending authority provided in FY16.

- Project has $100M in Congressionally directed spending authority for FY16: $58M of unspent carryover from FY15, $42M in new FY16 funding.

- Substantial progress in FY16 is required for maintaining CY2020 LRD (Launch Readiness Date).

According to Jeff Masek, the project scientist: "With a launch in 2020, Landsat-9 will propel the program into the next half-century of global observations. That's the hallmark of Landsat: the longer the satellites view the Earth, the more phenomena you can observe and understand."

Landsat-9, like Landsat-8, will have a higher imaging capacity than past Landsat missions, allowing more valuable data to be added to the Landsat's global land archive.

Landsat-8, after collecting data for 3.5 years, has already added over 827,000 images to the archive—this represents 12.5 percent of the entire 44-year Landsat data collection—and each day Landsat-8 adds another ~700 new scenes. Landsat-9, like Landsat-8, will be both radiometrically and geometrically better than earlier generation Landsats.

Landsat-9 is essential for informed land use decisions:

Landsat-9 will extend our ability to measure changes on the global land surface at a scale where we can separate human and natural causes of change. When land use and resource availability issues arise, Landsat-9 will help decision makers make informed management decisions. Landsat-9 will thus contribute a critical component to the international strategy for monitoring the health and state of the Earth.

Landsat users can now take advantage of more frequent observations (every 8 days using two satellites). Applications such as weekly tropical deforestation alerts, water quality monitoring, and crop condition reports are now feasible with the constellation.

With increased activity in international and commercial remote sensing, Landsat has emerged as a cornerstone of the global constellation of imagers. The science quality of the Landsat archive, including careful calibration, allows it to serve as a "gold standard" for studies harmonizing multiple sources of satellite imagery.

Landsat-9 will enable informed decision support for key areas such as:

• Tropical deforestation and global forest dynamics: the Landsat archive provides an impartial and unbiased record of Earth's forests for world governments and resource organizations to verify claims of environmental protection and carbon storage.

• Urban expansion: the Landsat record helps us visualize the impact of humankind's convergence on urban centers and to understand the environmental consequences.

• Water use: Landsat-9 will be an invaluable tool for managing water in areas such as the Western U.S. where water is scarce and water usage between agriculture, industry, and residential needs is very competitive.

• Coral reef degradation: Landsat has helped enable global monitoring of Earth's reefs.

• Glacier and ice-shelf retreat: the Landsat archive chronicles changes to 98 percent of Earth's glaciers, and Landsat-9 will continue monitoring them into the future.

• Natural and man-made disasters: Landsat data are regularly used as part of the International Disaster Charter, mapping disaster impacts to save lives.

• Climate change: Landsat data provide a direct view of how almost five decades of climate change have affected Earth's surface and biology.


Some background: Already in April 2015, NASA and the U.S. Geological Survey (USGS) have started work on Landsat- 9, planned to launch in 2023, to extend the Earth-observing program's record of land images to half a century. 5)

Landsat is a remarkably successful partnership," said Sarah Ryker, USGS deputy associate director for climate and land use change, Reston, Virginia. "Last year the White House found that GPS, weather satellites, and Landsat are the three most critical types of Earth-orbiting assets for civil applications, because they're used by many economic sectors and fields of research. Having Landsat-9 in progress, and a long-term commitment to sustainable land imaging, is great for natural resource science and for data-driven industries such as precision agriculture and insurance."

NASA's Goddard Space Flight Center in Greenbelt, Maryland, will lead development of the Landsat-9 flight segment. Goddard will also build the TIRS-2 (Thermal Infrared Sensor-2), which will be similar to the TIRS that the center built for Landsat-8. The new improved TIRS will have a five-year design lifetime, compared to the three-year design lifetime of the sensor on Landsat-8.

With decades of observations, scientists can tease out subtle changes in ecosystems, the effects of climate change on permafrost, changes in farming technologies, and many other activities that alter the landscape.

SLI (Sustainable Land Imaging) 2016-2035:

President Obama's NASA budgets of FY14 and FY15 called for design and initiation of an affordable, sustained,Land Imaging Satellite System (with USGS) to extend the Landsat data record for decades –not just the "next mission". 6)

The SLI program will enable the development of a multi-decade, spaceborne system that will provide users worldwide with high-quality, global, land-imaging measurements that are compatible with the existing 44-year Landsat data record. Landsat-9 is the latest satellite in the Landsat series — it will continue Landsat's irreplaceable record of Earth's land surface upon its 2020 launch. To reduce the build time and a risk of a gap in observations, Landsat-9 will largely replicate its predecessor Landsat-8.

Landsat-7

• Launched in 1999

• Scan Line Corrector instrument hardware failure in 2003 resulted in a loss of 22% of each Landsat-7 scene

• Collecting ~475 scenes per day; ~22% of pixels missing per scene (faulty scan-line corrector)

• LS-7 collection strategy modified to concentrate on continental coverage(L8 capturing islands and reefs)

• Expected to be decommissioned in 2020 (potential extension by an additional 24 months beyond 2020 if science is still valuable from data acquired earlier than 09:30 MLT).

Landsat-8

• Launched in February 2013

• OLI (Operational Land Imager); the 30 m resolution, multispectral instrument) is operating superbly

• TIRS (Thermal Infrared Sensor) is experiencing a stray light problem in one of two channels; also now operating on redundant hardware

• Currently collecting 725 scenes/day (exceeding the requirement of 400 scenes/day)

• Fuel could last ~20 years based on operational consumption to date.

Table 1: Landsat program on-orbit status as of July 2015

Landsat9_AutoA

Figure 2: SLI (Sustainable Land Imaging) architecture, past and ongoing missions (image credit: NASA, Ref. 6)

Legend to Figure 2:

- a) Limited data of Landsat-4 due to transmitter failure soon after launch. Only 45,172 Landsat-4 TM (Thematic Mapper) scenes from 1982-1993 are available for science users ~10 scenes/day (versus 725 scenes/day from Landsat-8)

- b) Data coverage of Landsat-5 is limited to CONUS (Continental US) and international ground station sites after a transmitter failure in 1987; the MSC (Multispectral Scanner) turned off in August 1995.

- c) Degraded performance due to SLC (Scan Line Corrector) failure in May 2003.

Landsat-9 mission objectives:

• Collect and archive moderate-resolution, reflective and emissive multispectral image data affording seasonal coverage of the global land mass for a period of no less than five years.

• Ensure that Landsat-9 data are sufficiently consistent with data from the earlier Landsat missions, in terms of acquisition geometry, acquisition rates, calibration, coverage characteristics, spectral and spatial characteristics, output product quality, and data availability to permit studies of land cover and land use change over multi-decadal period.

• Distribute standard Landsat-9 data products to users on a nondiscriminatory basis and at no cost to the users.

 


 

Spacecraft:

The Landsat-9 satellite will be constructed at Orbital ATK, NASA awarded a contract in October 2016. Landsat-9 is based on the company's LEOStarTM-3 platform, the medium-class LEO (Low Earth Orbit) spacecraft successfully flown on Landsat-8 and NASA's Fermi and Swift Gamma-ray astrophysics observatories. Landsat-9 will be designed, manufactured and tested by Orbital ATK's Space Systems Group at its facilities in Gilbert, Arizona, the same location and production team that executed the Landsat-8 program. Orbital ATK will also support launch, early orbit operations and on-orbit check-out of the observatory, which is scheduled for launch in December of 2020. 7) 8)

Landsat9_Auto9

Figure 3: Artist's rendering of the Landsat-9 spacecraft (image credit: Orbital ATK)

A spacecraft description will be added as more information becomes available.

 

Project development status:

• September 24, 2017: The USGS awarded the prime contract to General Dynamics Mission Systems, with a.i. solutions as one of the subcontractors. Under this contract, General Dynamics will continue to operate Landsat-8 from the existing mission operations center at the GSFC (Goddard Space Flight Center) and will begin design and integration of a new Landsat Multi-satellite Operations Center at GSFC. 9)

- Under the requirements of the contract, a.i. solutions will provide key flight dynamics and mission planning for the ongoing Landsat-8 mission, develop the flight dynamics component of the ground system that will launch and operate on Landsat-9 as well as transition Landsat-8 to the new flight dynamics system once complete.

• September 18, 2017: The Landsat-9 satellite mission team completed a successful Mission PDR (Preliminary Design Review) last week. During the review, the mission team demonstrated to an independent Standing Review Board that all design plans for the Landsat-9 mission are both sound and well integrated. - The PDR is the last milestone before the major Key Decision Point C, scheduled for December 2017, after which the mission officially enters its implementation phase. The review took place from September 12-15 at NASA's Goddard Space Flight Center in Greenbelt, Maryland. 10)

• August 10, 2017: The Landsat-9 spacecraft passed an important progress evaluation milestone in mid-July. The PDR (Preliminary Design Review) for the Orbital ATK-sourced spacecraft was held from July 18–20 in Gilbert, Arizona at the satellite fabricator's facility. 11)

- NASA concluded that the Landsat 9 spacecraft is on track and meeting all of the system and schedule requirements needed for the mission's planned December 2020 launch.

• February 28, 2017: The Landsat-9 TIRS-2 (Thermal Infrared Sensor-2) team at the NASA/GSFC (Goddard Space Flight Center) has successfully completed their ICDR (Instrument Critical Design Review). 12)

• February 27, 2017: USGS and NASA officials will participate in the Landsat-9 SSRR (Spacecraft System Requirements Review) February 28 and March 1 at the Orbital ATK facility in Gilbert, Arizona. 13)

- An independent panel will review the work of the spacecraft vendor to understand system requirements in a number of areas, including being able to control the orientation of Landsat 9 through attitude control, how much redundancy is built into the spacecraft, and how much fuel will be onboard.

- Reviewers will also look at fault management capabilities, which include hardware and software features used to address any potential problems that may arise in orbit. This is the final such review before full-scale spacecraft design and development begins.

• On November 30 – December 1, 2016, USGS EROS hosted the Landsat-9 GSRR (Ground System Requirements Review) in Sioux Falls, SD. This was the first in a series of major project reviews for Landsat-9, which is scheduled for launch December 2020. The GSRR included presentations given to a joint NASA/USGS review panel on the proposed components of the Landsat-9 Ground System. At the conclusion of the review, the panel approved the Landsat-9 Ground System team to proceed to the PDR (Preliminary Design Review) stage. 14)

• Oct. 25, 2016: NASA has awarded a delivery order under the Rapid Spacecraft Acquisition III (Rapid III) contract to Orbital ATK for the Landsat 9 spacecraft. This contract is a 5-year, firm fixed-price delivery order for the purchase of the Landsat-9 spacecraft in the amount of $129.9 million. Orbital will design and fabricate the spacecraft, integrate the mission's two government-furnished instruments, and conduct satellite-level testing, in-orbit satellite checkout, and mission operations support. The work will be performed at the contractor's facilities and at the launch site at Vandenberg Air Force Base in California. 15)

• May 17, 2016: NASA has awarded a sole source contract to BATC (Ball Aerospace and Technology Corporation) of Boulder, Colorado, for the TIRS-2 (Thermal Infrared Sensor-2) instrument Cryocooler for Landsat-9. 16) — TIRS-2 is being upgraded to a Class B instrument, with additional steps being taken to fix the straylight issue affecting the Landsat-8 TIRS instrument.

• On March 4, 2015, the Landsat-9 project was officially directted to initiate activities with strong support from Administration, Congress, NASA, and USGS (Ref. 2).

Landsat9_Auto8

Figure 4: Overview of spectral band coverage in various missions (HyspIRI, Sentinel-2 of ESA, Landsat-8 and Landsat-7 (image credit: NASA)

 

Mission Schedule and Lifecycle (Figure 5): NASA-managed satellite builds have a mission lifecycle that is divided into incremental phases. Phase A is concept and technology development; Phase B is preliminary design and technology completion; Phase C is final design and fabrication; Phase D is system assembly, integration/testing, and launch readiness; Phase E starts after on-orbit operational checkout and ends at the mission's operational end. 17)

Landsat9_Auto7

Figure 5: A timeline of Landsat-9 mission development and lifecycle (image credit: NASA)

What Makes Landsat-9 a Science-Grade Satellite?

Scientific studies rely on science-grade instruments—instruments that record information reliably and accurately. Studying long-term changes to Earth's surface requires carefully calibrated observations to measure subtle changes occurring over decades. The Landsat-9 mission will extend the data record of Earth observations and advance the scientific study of land change and land use into the next half-century. Consistency in Landsat's spatial resolution, calibration, and spectral characteristics over four decades allows long-term, consistent comparisons of historical and current data.

1) Spectral Coverage: For a science-grade instrument, the ability to have broad spectral coverage—the ability to see parts of the light spectrum beyond the visible and VNIR (Near Infrared ) — is essential. Landsat-9 will collect data in three shortwave infrared bands and two thermal infrared bands, in addition to VNIR. These longer wavelength bands play a vital role in water use measurements (evapotransporation), fire scar mapping, volcanic lava flow mapping, and other indices used for land use monitoring.

Because of optical diffraction, the ability to image features at longer wavelengths requires progressively larger telescope apertures. In addition, multiple types of detectors (or even separate instruments) may be required to cover the full spectral range. Thermal detectors must be cooled to very low temperatures (-150º C) in order to be sensitive to the low radiance levels emitted at normal Earth temperatures, which in turn necessitates coolers that can cool to cryogenic temperatures.

2) Accuracy: Radiometric resolution and geometric fidelity: We use the term "science-grade" a lot when describing Landsat's instruments. What we mean by this is that the data collected by Landsat satellites have very strict levels of accuracy that they must live up to—the radiation measurements must be reliable for each of the Landsat spectral bands.

This reliability is what makes comparisons of Landsat data day-to-day, year-to-year and sensor-to-sensor possible. To do scientific research you need to know you can make accurate comparisons.

Radiometric resolution is the ability to measure small differences in radiation over a wide range of brightness levels and geometric fidelity is the ability to know exactly where any given pixel is located. Large optics help by mitigating stray light and ensuring focal plane uniformity (i.e. sameness across the field of the tens-of-thousands of detectors which the telescope focuses light on) to avoid skewed measurements.

The Landsat-9 instruments provide radiometric calibration via onboard sources (blackbody, lamps) and a solar-diffuser system for the reflective bands. Additionally, every full Moon, Landsat-9 (like Landsat-8) will be turned toward the Moon to scan the distant lunar surface multiple times. Since the Moon has no atmosphere, it is the perfect consistent source of light to measure–like a gray card for calibrating a camera's exposure. Data from the Moon is used to both complement and corroborate the results from the other on-board calibration activities.

3) Redundancy: Live long and be precise: Landsat-9 must have sufficient redundancy to ensure the collection of science-grade data over a 5-year mission life. This means that many critical components have a redundant counterpart to minimize the risk of a single point failure. For example, Class B missions like Landsat-9 typically have two of almost every kind of electronics on board (e.g., spacecraft computers, communications electronics, attitude control electronics, instrument control electronics), extra reaction wheels, and extra thrusters. In the event that some primary piece of equipment on the satellite experiences an anomaly that impacts its performance, ground controllers can switch over to the backup unit on the satellite to do the job. But implementing redundancy comes at the expense of higher cost and longer development time, and it also tends to make things bigger and heavier. So a critical element of mission design is performing detailed reliability and risk assessments to determine where redundancy might be most beneficial, and then implementing redundancy as efficiently as possible to provide the needed level of reliability.

 

Launch: A launch of Landsat-9 is planned for December 2020 from VAFB, CA.

Orbit: Sun-synchronous near-circular orbit, altitude = 705 km, inclination = 98.2º, period = 99 minutes, repeat coverage = 16 days. The Landsat-9 satellite will be in coplanar orbit with Landsat-8, 180º apart. This reduces the repeat coverage to 8 days.

 


 

Sensor complement (OLI-2, TIRS-2)

The two NASA science instruments are OLI-2 and TIRS-2. OLI-2 is being constructed by BATC (Ball Aerospace & Technology Corp.), while TIRS-2 is being developed by NASA's Goddard Space Flight Center.

Landsat-9 will fly near-identical copies of the OLI (Operational Land Imager) and TIRS (Thermal Infrared Sensor) instruments that were flown on Landsat-8. The TIRS instrument will be upgraded to a risk class B implementation, whereas no changes are planned for OLI. With respect to the Landsat-9 project, these instruments will be referred to as OLI-2 and TIRS-2.

In the four+ decades since Landsat-1 launched, the spectral bands of the Landsat satellites have evolved. Landsat-9, like Landsat-8, has the most evolved of the Landsat spectral bands. 18)

In 1972, Landsat-1 launched with a three-band RBV (Return Beam Vidicon) camera system and a secondary four-band digital MSS (Multispectral Scanner System). The MSS with its scanning mirror whisking back and forth to create an image, seemed to many researchers of the period the antithesis of the high quality camera systems traditionally used in aerial studies. But the secondary MSS instrument proved itself the imaging powerhouse producing superior data. But the four-band MSS was spectrally coarse; it essentially mimicked the color infrared films that became widely used during WWII (World War II).

For follow-on sensors, Landsat management brought together scientists from diverse fields to discuss and recommend spectral channels most useful for answering questions in their research areas. These discussions informed the more sophisticated TM (Thematic Mapper) sensor with its seven spectral bands that flew on the Landsat missions-4 and -5. The Landsat TM band placement has subsequently guided all successive Landsat sensors and is is also echoed in almost all modern passive remote sensing systems—domestic, international, public, commercial, and even those circling about other planets.

Landsat9_Auto6

Figure 6: MSS aboard Landsats 1–5 had four bands. TM (Thematic Mapper) aboard Landsats-4 & -5 had seven bands. Landsat-7's ETM+ (Enhanced Thematic Mapper Plus) has 8 bands and Landsats-8 &-9 have 11 bands. The atmospheric transmission values for this graphic were calculated using MODTRAN for a summertime mid-latitude hazy atmosphere (circa 5 km visibility), image credit: NASA

Today, Landsat-8 has and Landsat-9 will have eleven spectral bands acquired by the OLI/TIRS and OLI-2 / TIRS-2 instruments, respectively. These new bands help scientists measure high, thin clouds and water quality.

The previous generation sensor, ETM+, supports 8-bit data products, which means means the brightest to the darkest pixels are discriminated with 256 data values. The greater sensitivity of OLI, OLI-2, TIRS, and TIRS-2 instruments allow the signal to be discriminated over 4096 data values (12 bits), and the range has been increased to prevent saturation of very bright targets such as snow.

Band No

Band

Min lower band edge (nm)

Max upper band edge (nm)

Center wavelength (nm)

Max spatial resol. at nadir (m)

1

Coastal / Aerosol

433

453

443

30

2

Blue

450

515

482

30

3

Green

525

600

562

30

4

Red

630

680

655

30

5

NIR

845

885

865

30

6

SWIR-1

1560

1660

1610

30

7

SWIR-2

2100

2300

2200

30

8

Panchromatic

500

680

590

15

9

Cirrus

1360

1390

1375

30

10

Thermal

10300

11300

10800

100

11

Thermal

11500

11300

12000

100

Table 2: Specification of the OLI-2 and TIRS-2 spectral band requirements

 

OLI-2 (Operational Land Imager-2)

OLI-2 will continue observations in the visible, near infrared, and shortwave infrared portions of the electromagnetic spectrum and includes two new spectral bands, one of which is designed to support monitoring of coastal waters and the other to detect previously hard to see cirrus clouds that can otherwise unknowingly impact the signal from the Earth's surface in the other spectral bands. 19)

The spatial resolution of its images will be 15 m for the panchromatic band and 30 m for the multispectral bands. The image swath will be 185 km wide, covering wide areas of the Earth's landscape while providing sufficient resolution to distinguish land cover features like urban centers, farms, and forests. Landsat-9's near-polar orbit precesses at the same rate the Earth rotates around the sun, allowing the entire Earth to fall within view every 16 days at the same local solar time.

OLI-2 will, to the extent possible, be a copy of OLI for Landsat-9 to maintain data continuity with Landsat-8 and to minimize cost and risk (Ref. 2).

Landsat9_Auto5

Figure 7: A diagram of OLI-2 showing its main components (image credit: NASA)

Instrument design: The OLI-2 is a pushbroom sensor. Its focal plane features long arrays of photosensitive detectors. Incident radiation is focused onto the focal plane by a four-mirror anastigmatic telescope. OLI-2 has a 15ºFOV covering a 185 km across-track ground swath.

Landsat-9's photosensitive detectors are divided into 14 modules. There are ~7000 across-track detectors for each OLI-2 spectral band, except the 15 m panchromatic band that has 13,000 detectors. Each spectral band has a specific filter; together the filters are arranged like a "butcher-block" over each module's detector array. The visible and near-infrared detectors are made from Silicon PIN (SiPIN). The shortwave infrared detectors are made from Mercury–Cadmium–Telluride (MgCdTe).

The OLI-2 telescope will view the Earth through its Earth-view baffle. There is a shutter wheel assembly between the Earth-view baffle and the aperture stop. Light enters the telescope via a hole in the shutter wheel during nominal observations. The solar-view baffle is occasionally pointed at the sun so that a diffuser panel can reflect solar illumination into the telescope for calibration purposes. Two lamp assemblies with six small lamps each inside an integrating hemisphere can illuminate the full OLI-2 focal plane through the telescope with the shutter closed as another component of the OLI-2 calibration subsystem.

Landsat9_Auto4

Figure 8: Drawing of the OLI-2 focal plane showing the 14 detector modules; the "butcher-block" filters are the striped black boxes where the upper and lower detector modules meet (image credit: BATC)

 

TIRS-2 (Thermal Infrared Sensor-2)

TIRS-2 will be a rebuild of the Landsat-8 TIRS except TIRS-2 will be upgraded to Risk Class B for Landsat-9. The primary Risk Class B improvements are (Ref. 2):

• Redundant MEBs (Main Electronics Boxes)

• Redundant CCEs (Cryocooler Electronics)

• Redundant RSEs (Switch Electronics).

Other TIRS-2 improvements:

• Improved stray light performance through improved telescope baffling

• Improved position encoder for scene select mirror to address problematic encoder on Landsa- 8 TIRS

• Improved thermal blanketing to better protect from micrometeorite impact; in accordance with new GSFC guidelines.

The TIRS-2 instrument is a two-band thermal imaging sensor with a push broom sensor (like OLI-2). Its focal plane has long arrays of photosensitive detectors.

The instrument features a four-element refractive telescope that focuses an f/1.64 beam of thermal radiation onto a focal plane that is cryogenically cooled. TIRS-2 has a 15º FOV to match the 185 km across-track swath of OLI-2. The TIRS-2 focal plane holds three modules with QWIP (Quantum Well Infrared Photodetector) arrays arranged in an alternating pattern along the focal plane centerline.

Spectral filters cover each focal plane module to create TIRS-2's two specified bandwidths. Each QWIP array is 640 detectors long in cross-track allowing for overlap between the arrays to produce an effective linear array of 1850 pixels spanning across the 185 km ground swath.

The FOV is flipped between nadir (Earth) and both an internal blackbody and a deep space view used for on-orbit radiometric calibration using a mirror controlled by a scene select mechanism. This allows the view to be changed without changing the nominal Earth-viewing attitude of the Landsat-9 spacecraft.

A two-stage mechanical cryocooler will cool TIRS-2's focal plane. This permits the QWIP detectors to function at their required temperature of 43 K (-230° C). There will be two radiators mounted to the side of the TIRS-2 instrument structure. One dissipates heat from the cryocooler and the other passively maintains a constant TIRS-2 telescope temperature of 185 K (-88° C).

Landsat9_Auto3

Figure 9: A diagram of TIRS-2 showing its main components (image credit: NASA)

Landsat9_Auto2

Figure 10: Left: The TIRS-2 focal plane: the 3 squares in the center of the circuit board are QWIPs. Each QWIP can measure 327,680 pixels. The QWIPs on TIRS-2 will detect two narrow segments of the thermal infrared spectrum. Right: The TIRS-2 cryocooler will look like the one above (image credit: NASA)

 


 

Ground Segment:

On November 30 – December 1, 2016, the USGS EROS hosted the Landsat-9 GSRR (Ground System Requirements Review) in Sioux Falls, SD (South Dakota). This was the first in a series of major project reviews for Landsat-9, which is scheduled for launch in December 2020. The GSRR included presentations given to a joint NASA/USGS review panel on the proposed components of the Landsat-9 Ground System. At the conclusion of the review, the panel approved the Landsat-9 Ground System team to proceed to the PDR (Preliminary Design Review) stage. 20)

Landsat9_Auto1

Figure 11: Landsat-9 operations concept architecture - identical to Landsat-8 (image credit: USGS)

The ground segment consists of the following elements (Ref. 3):

1) MOC (Mission Operations Center) with the following functions: Command & telemetry, Trending & analysis, Flight dynamics, Science acquisition planning, Primary and backup MOCs at GSFC.

- FOT (Flight Operations Team) performs mission planning and scheduling, command and control, health and status monitoring, orbit and attitude maintenance, mission data management.

- NASA provides MOC and BMOC facility at GSFC as well as NASA institutional services (SN, NEN, NISN, FDF) through on-orbit acceptance.

2) Operations Flight Operations Team:

- NASA leads (USGS supports) mission operations readiness activities, pre-launch, launch and early orbit activities.

- USGS leads operations following on-orbit acceptance.

3) DPAS (Data Processing and Archive System) with the following functions: Provides data ingest, product generation, & image assessment/processing, User Portal web interface for data discovery, product selection & ordering (for Cal/Val), & product distribution Storage and archive services.

- DPAS facility at USGS EROS Center.

4) GNE (Ground Network Element) with the following functions: Ground stations/antennas for X-band image & S-band telemetry data downlink; Generation of S-band command uplink.

- LGN (Landsat Ground Network) stations provide X- and S-band communications with the Observatory.

- LGN stations in Sioux Falls, SD; Fairbanks, AK; and Svalbard, Norway.

- DCRS (Data Collection and Routing Subsystem) gathers mission data from LGN stations into complete intervals to transfer to the DPAS.

Landsat9_Auto0

Figure 12: USGS/EROS facilities in Sioux Falls, SD (image credit: USGS)

 


1) "Landsat-9 — continuing the legacy - 2020 and beyond," NASA, URL: https://landsat.gsfc.nasa.gov/landsat-9/

2) Del Jenstrom, Jim Nelson, "Landsat 9 Project Briefing to the Landsat Science Team," NASA, USGS, January 13, 2016, URL: https://landsat.usgs.gov/sites/default/files/documents
/L9%20LST%20Charts%20Jenstrom-Nelson%20160113.pdf

3) Del Jenstrom, Jim Nelson, "Landsat 9 Project Briefing to the Landsat Science Team," NASA/GSFC, USGS/EROS, July 26, 2016, URL: https://landsat.usgs.gov/sites/default/files
/documents/L9%20LST%20Charts%20Jenstrom-Nelson%20160113.pdf

4) Brian L. Markham, Del Jenstrom, Jeffrey G. Masek, Phil Dabney, Jeffrey A. Pedelty, Julia A. Barsi, Matthew Montanaro, "Landsat 9: Status and Plans," white paper, 2016, URL: https://landsat.gsfc.nasa.gov/landsat-9/landsat-9-overview/

5) Steve Cole, "NASA, USGS Begin Work on Landsat 9 to Continue Land Imaging Legacy," NASA, Release 15-061, April 16, 2015, URL: http://www.nasa.gov/press/2015/april/nasa-usgs-
begin-work-on-landsat-9-to-continue-land-imaging-legacy/

6) Michael H. Freilich, "NASA Earth Science Division: Status, Plans, Accomplishments," NASA, 27 July 2015, URL: http://science.nasa.gov/media/medialibrary/2015/08/11/FREILICH_July_SC_ESD.pdf

7) "NASA green lights key phase for Landsat-9's development," NASA Spaceflight.com, Oct. 25, 2016, URL: https://www.nasaspaceflight.com/2016/10/nasa-green-light-landsat-9s-development/

8) "Orbital ATK Continues Landsat Legacy with Contract for Landsat 9," Orbital ATK, URL: https://www.orbitalatk.com/news-room/feature-stories/Landsat9/default.aspx?prid=180

9) "Contract Awarded to Landsat 8/9 Team Member, a.i. solutions," Satnews Daily, Sept. 24, 2017, URL: http://www.satnews.com/story.php?number=1138151745

10) "Landsat 9 Preliminary Design Review Successfully Completed," Landsat Science, Sept. 18, 2017, URL: https://landsat.gsfc.nasa.gov/landsat-9-
preliminary-design-review-successfully-completed/

11) "Landsat 9 Spacecraft Development on Schedule," Landsat Science, August 10, 2017, URL: https://landsat.gsfc.nasa.gov/landsat-9-spacecraft-development-on-schedule/

12) "Landsat 9 Thermal Instrument Passes Critical Design Review," NASA, Feb. 28, 2017, URL: https://landsat.gsfc.nasa.gov/landsat-9-thermal-instrument-passes-milestone/

13) "Landsat 9 Spacecraft Systems Review," NASA, Feb. 27, 2017, URL: https://landsat.gsfc.nasa.gov/landsat-9-spacecraft-systems-review/

14) "December 2, 2016 - Landsat 9 Ground System Review," USGS, Dec. 2, 2016, URL: https://landsat.usgs.gov/december-2-2016-landsat-9-ground-system-review

15) Steve Cole, Cynthia M. O'Carroll,"NASA Awards Contract for Sustainable Land Imaging Spacecraft," NASA, Oct. 25, 2016, URL: http://landsat.gsfc.nasa.gov/?p=13305

16) Cynthia M. O'Carroll, "Thermal Infrared Sensor-2 Instrument Cryocooler Contract Awarded for Landsat 9," NASA, May 17, 2016, URL: http://landsat.gsfc.nasa.gov/?p=12464

17) "Landsat 9 Mission Details," NASA, 2017, URL: https://landsat.gsfc.nasa.gov/landsat-9/landsat-9-mission-details/

18) "Landsat 9 Spectral Bands," NASA, URL: https://landsat.gsfc.nasa.gov/landsat-9/landsat-9-spectral-bands/

19) "Landsat-9 Instruments," NASA, URL: https://landsat.gsfc.nasa.gov/landsat-9/instruments/#oli

20) "Landsat 9 Ground System Review," USGS, Dec. 2. 2016, URL: https://landsat.usgs.gov/december-2-2016-landsat-9-ground-system-review
 


The information compiled and edited in this article was provided by Herbert J. Kramer from his documentation of: "Observation of the Earth and Its Environment: Survey of Missions and Sensors" (Springer Verlag) as well as many other sources after the publication of the 4th edition in 2002. - Comments and corrections to this article are always welcome for further updates (herb.kramer@gmx.net).

Spacecraft   Launch   Sensor Complement   Ground Segment   References   Back to top